Dexter Power 3906112953, Manual

Page: 25 / 56

Trouble-shooting
Failure Possible cause Remedy
Motor does not
start, runs too
slowly, or gets
extremely hot.
Fault in electric current or mains
voltage too low.
Check mains voltage.
Electric cable too long or too thin. Get a new cable from your dealer.
Faulty pressure switch. Have it repaired or replaced by your dealer.
Faulty motor. Have it repaired or replaced by your dealer.
Vibrations or
strange noise.
Loose parts. Have checked by your dealer and repaired, if
needed.
Foreign body in compressor. Have checked by your dealer and repaired, if
needed.
Insufficient
pressure or drop in
output capacity. Motor runs too slowly. Have checked by your dealer and repaired, if
needed.
Dirty filter cartridge. Clean or replace filter cartridge.
Leakage in safety valve. Have switch repaired or replaced by your dealer.
Leakage in tube. Have checked by your dealer and repaired, if
needed.
Gasket damaged. Have checked by your dealer and repaired, if
needed.
Valve seat damaged or covered with
carbon layer. Have checked by your dealer and repaired, if
needed.
• Data of motor rating label