Dexter Power 3906112953, Manual

Page: 11 / 56

international 11
5 Securely store unused electric tools
–
Unused electric tools should be stored in a dry,
elevated or closed location out of the reach of chil -
dren.
6 Do not overload your electric tool
–
They work better and more safely in the specified
output range.
7
Wear suitable clothing
– Do not wear wide clothing or jewellery, which can
become entangled in moving parts.
– Rubber gloves and non-slip shoes are recom -
mended when working outdoors.
– Tie long hair back in a hair net.
8
Do not use the cable for purposes for which it is not
intended
–
Do not use the cable to pull the plug out of the outlet.
Protect the cable from heat, oil and sharp edges.
9
Take care of your tools
– Keep your compressor clean in order to work well
and safely.
– Follow the maintenance instructions.
–
Check the connection cable of the electric tool regu -
larly and have it replaced by a recognised specialist
when damaged.
– Check extension cables regularly and replace them
when damaged.
10 Pull the plug out of the outlet
–
During non-use of the electric tool or prior to mainte -
nance and when replacing tools such as saw blades,
bits, milling heads.
11 Avoid inadvertent starting
–
Make sure that the switch is switched off when plug -
ging the plug into an outlet.
12
Use extension cables for outdoors
– Only use approved and appropriately identified ex -
tension cables for use outdoors.
– Only use cable reels in the unrolled state.
13
Remain attentive
– Pay attention to what you are doing. Remain sensible
when working. Do not use the electric tool when you
are distracted.
14
Check the electric tool for potential damage
– Protective devices and other parts must be carefully
inspected to ensure that they are fault-free and func -
tion as intended prior to continued use of the electric
tool.
– Check whether the moving parts function faultlessly
and do not jam or whether parts are damaged. All
parts must be correctly mounted and all conditions
must be fulfilled to ensure fault-free operation of the
electric tool.
–
Damaged protective devices and parts must be prop -
erly repaired or replaced by a recognised workshop,
insofar as nothing different is specified in the operat -
ing manual.
–
Damaged switches must be replaced at a customer
service workshop.
–
Do not use any faulty or damaged connection cables.
– Do not use any electric tool on which the switch can -
not be switched on and off.
15 Have your electric tool repaired by a qualified
electrician
– This electric tool conforms to the applicable safety
regulations. Repairs may only be performed by an
electrician using original spare parts. Otherwise ac -
cidents can occur.