8514-302-001 REV B page 43
There are three small colored LEDs located on the upper region of the
Variable Frequency Drive (VFD). They are labeled as “READY”, “RUN”,
and “FAULT” and can be used for troubleshooting. The definitions of the
LEDs are listed in Table below.
LED Status
Washer Condition
Steady Yellow
Tumbling
Blinking Yellow
Stop from Tumble
Steady Yellow
Ramp to Intermediate or Final Extract Spin
Steady Yellow
Spinning (Intermediate or Final)
Blinking Yellow
Stop from Spin (Intermediate or Final)
Steady Green
Idle Mode (No Cylinder Movement)
Steady Red
VFD fault
Blinking Red
VFD warning
Summary of Contents for T-300 VENDED
