17
CHAPTER 6 Operations of Web-GUI
In addition to using front buttons to control the network encoder and USB device, users
can also perform the same operation in an easier way with the web Brower in the PC
(Personal Computer).
Login
The default IP address of this device is 192.168.0.136. (We can modify the IP through
the front panel.)
Connect the PC and the network encoder with a net cable, and use ping command to
confirm they are on the same network segment.
I.G. the PC IP address is 192.168.99.252, we then change the device IP to
192.168.99.xxx (xxx can be 1 to 254 except 252 to avoid IP conflict).
Use web browser to connect the device with PC by inputting the device‟s IP address in
the browser‟s address bar and press Enter.
It will display the Login interface as Figure-1. Input the Username and Password (Both
the default Username and Password are “admin”.) and then click “OK” to start the
device setting.
Figure-1
