14
CHAPTER 5 Operations of Record TS and Play TS
through USB Disk
The NDS3558A network encoder has functions of:
1.
*.ts Video Creation
See Chapter 3.
2.
TS Record and Save
Main Menu
USB Device
USB Device
Record TS
Record TS
Record Start
Record TS
Advanced Config
Start Record
Advanced Config
File name
File size
Data Mode
►Single File
Segment File
Loop Record
Record mode select
▼
Stop Record
1)
Connect the signal source, enter “Record Start” and then choose one record mode
to start recording the encoded TS. And, press UP key and then Enter key to stop
recording.
There are 3 record modes provided:
“Single file”: For example, when the file size is set as 1000M and the *.ts is
recorded up to 1000M, it automatically stops recording TS.
“Segment file”: For example, when the file size is set as 1000M and the *.ts is
recorded up to 1000M, it automatically saves the files and continues to record
TS and save it to next file until the USB memory is full.
“Loop record”: It automatically saves the files and continues to record TS and
save it to next file. When the USB memory is full, it replaces the previous file.
2)
Advanced Config:
File Name: Users can enter this menu to edit name for the *.ts files to be recorded.
For example, if users name it “Record-”, it will give name to the saved *.ts files
“Record-001.ts”, “Record-002.ts”… “Record-00N.ts”.
File Size: users can set the file size for the *.ts to be recorded. A single file can be
maximum 2048M in size.
Data Mode: There are 3 data modes:
