9
Users can select H.264 encode format here.
NOTE: If you are to apply HLS as the output stream protocol, you need
choose H.264 here as HLS supports only H.264 Video format.
Users can filter the null packet to boost the video‟s
effect bit rate.
A single video can be maximum 2.0 GB in size.
(NDS3558A cannot play a video bigger than 2GB.)
After setting all the parameters, click
to start the transformation. Click “OK”
when it prompts “The operation completed normally.”
Click this button to stop the transformation
before
the operation completed.
After finishing the transform operation, users can click this button to play the
generated TS video.
File Management
After finishing the transformation, users can find out the videos files generated
according the Saving Directory. For example, we save the video in “D:\ABC” so we can
find it in Disk D\Folder ABC.
Management:
1.
Three files will be generated if the Null Packet has been filtered.
2.
Two files will be generated if the Null Packet has
not
been filtered.
Remarks:
All the file names are automatically generated.
Rename the files before creating a new video to avoid covering the previous files.
If you rename “FinalOutput-204-0.ts” or “FinalOutput-204-0.tsinfo”, always keep
the names the same (Extension excluded) and then NDS3558A can read them and
play the video.
TS video and information files: Users need to save the two files together in
the USB memory, and then NDS3558A can read them and play the video.
TS video for preview through the “Creator” interface by clicking “Play” button
TS video for preview through the “Creator” interface by clicking “Play” button
TS video: Users need to save it in the USB memory, and then NDS3558A can
read it and play the video.
