13
NOTE: If you are to apply HLS as the output stream protocol, you need choose
MPEG2-AAC here, as HLS supports only MPEG2-AAC Audio format.
6
) Program Information: User can enter the sub-menus to edit the
Program Name,
Provider Name
,
Service ID,
and PIDs of
PMT, PCR
,
Video
and
Audio
.
7) – 12)
Please refer to
Chapter 5
for details.
13
) IP Address: To configure IP address here.
14
) Subnet Mask: To configure subnet mask here.
15
) Gateway: To configure gateway here.
16
) Web Port: To configure web port here.
17
) MAC Address: To view MAC address here.
18
) Save Config:
Yes/No
-to save/give up the adjustment of setting.
19
) Load Saved CFG:
Yes/No
-to load/ not to load the saved configuration.
20
) Factory reset:
Yes/No
-choose/not choose the factory‟s default configuration.
21
) LCD Time out: Set the time limit that LCD will light off.
22
) Product ID: User can view the serial number of this device. It is read-only and
unique
23
) Version: It displays the version information of this device.
24
) Program name: Set the program name of the IP output stream.
25) – 27)
HTTP/RTSP/UDP/HLS: User can choose the output protocol and output
port at this interface.
