12
Main Menu
System
System
Save Config
System
Load Saved CFG
System
Product ID
System
Version Number
Save Config?
Yes ►No
Load SavedCFG?
Yes ►No
xxxxxxxxxxxxxx
xxxxxxxxxxxxxx
Version Number
SW:1.6 HW:A.20
System
Factory Reset
System
LCD Time-out
Reset all sets?
Yes ►No
LCD Time-out
►30 s
18
19
20
21
22
23
Main Menu
IP Stream
IP Stream
Program Name
IP Stream
HTTP&RTSP
Program Name
Program 1
IP Stream
UDP
IP Stream
HLS
24
25
26
27
HTTP&RTSP
HTTP/RTSP Enable
HTTP/RTSP Port
UDP
UDP Enable
UDP Port
HLS
HLS Enable
HLS Port
1) Network Encoder; Input=Lock; Encoder Rate=x.xxMbps; Valid Rate=x.xxMbps;
Max Rate=x.xxMbps.
2
) Alarm Status: For example, if the signal cable disconnected, it will display
Input
UnLock
under this menu.
3
) Uptime: It displays the working time duration of the device. It times upon power
on.
4
) Video Parameters: User can enter the items respectively to set video parameters.
Interface
: select a right interface type from the options provided. The device then
can automatically search the signal and starts to encode.
Resolution
: signal source
resolution, read-only.
Video Bit rate
: adjust in range of 1.000~19.000 Mbps.
Rate
Mode
: this unit user can choose CBR or VBR. User can also adjust values of rest
items (H.264 profile, H.264 level, Brightness: 0-128 & Contrast: 0-255 & Saturation:
0-128; Hue: -128 - +127; Video Normal)
5
) Audio Bit rate: Select audio bit rate from the options provided: 64, 96, 128, 192,
256, 320, 384kbps.
Audio Format: Select audio format among MPEG2, MPEG2-AAC and
MPEG4-AAC.
