Dexcowin ADX6000s, User Manual

Page: 42 / 110

USER Manual
41
 When the battery is fully charged there will be a beeping sound from the LCD
window and the power will turn on.

During operating, if battery replacement period is reached, LCD window of battery
level will show LOW status, and device is not available for X-RAY exposure. Also,
pop up window is activated to notify battery replacement.
 Battery level display and battery residual quantity shown on right side of LCD
window is as shown in Figure 7.17. If battery residual quantity is between 0 ~ 10%
section, replace with charged battery.
Figure 7.17 Battery level display and residual quantity

Battery charger consists of charger adapter and AC power cord.

Charging cradle and adapter shape is shown in 7.18.

Connect the charger cradle to the charger. Then connect the battery to the cradle.
Use bundled AC power line to connect charger adapter, and connect to AC power
code. AC power voltage range and frequency is 100 - 220V AC / 50- 60Hz. Be sure
to confirm if it is rated power before connecting AC power.

Settle battery to charge in charger cradle. As shown in Figure 7.19, settle battery
inside from top of charger cradle. At this point, both ends of battery should fit
81~100% 56~80% 31~55% 11~30% 0~10%