5
GB
Technical information
Alarm unit BA 611
Operating voltage:
9V
DC
Current input:
130mA (alarm), < 5mA (standby)
Power supply:
From the supplied mains
adapter or the backup battery
(9 volt block 6LR61,
not included)
Radio receiver:
433.92 MHz
Siren:
100 dB(A) +/- 5 dB(A) at 0.3 m
(mains operation)
Siren duration (max.):
Approx. 30 sec./ approx. 30 sec.
pause / approx. 30 sec. alarm
Gong function:
Can be deactivated; signals
each detected motion with a
gong sound
Programmable
telephone numbers:
Max. 5 numbers
Automatic dialling:
Up to 5 times
Programmable code:
3 to 6 digits
Exit delay:
Approx. 55 sec.
Entry delay:
Programmable: 0/5/10/15/
20sec.
Operating temperature: 0 °C to + 39 °C
Area of use:
Interior rooms
Housing material:
ABS
Housing dimensions:
Approx. 86 x 150 x 46 mm
(W x H x D)
Weight:
Approx. 197 g (without battery,
without accessories)
Motion detector
(attached to the alarm unit)
Sensor:
Passive infrared (PIR)
Detection angle:
Approx. 100 ° horizontal
Detection range:
Approx. 6 m at 20 °C (trans-
verse motion, mounting height
approx. 0.5 to 2 m)
Remote control BA 611 R
Operating voltage:
12V
DC
Current input:
max. 25 mA
Power supply:
1x battery 12V, alkaline
(type CN 23 A)
Transmission frequency: 433.92 MHz
Transmission range:
Approx. 20 m (in open space)
Coding:
Factory set unique code
Function indicator:
LED
Operating temperature: 0 °C to + 40 °C
Housing material:
ABS
Housing dimensions:
Approx. 45 x 67 x 16 mm
(W x H x D)
Weight:
Approx. 34 g (with battery)
Mains adapter
Power supply:
230V ~ AC, 50 Hz
Power consumption:
4.5VA
Output:
9V
DC, max. 500 mA
Safety advice
The following advice is intended for your safety and sat-
isfaction during operation of the device. Please note that
non-observation of this safety advice can lead to consid-
erable danger.
Explanation of the symbols and terms used:
Danger!
Non-observance of this instruction or
advice could endanger life and health.
Attention!
Non-observance of this instruction or
advice will endanger property.
Tip!
Observance of this instruction or advice will
achieve best performance.
Danger!
before connecting the 12 V DC adapter to the mains
that the electricity supply to the device is protected
by the appropriate fuse or trip in accordance with
the applicable regulations. Do not connect any other
power supply to the connection terminals. Other-
someone is in its direct vicinity Otherwise there is a
water or telecoms when you are drilling or mounting
cables in such a position that they cannot be dam-
aged or become a trip hazard. Otherwise there is a
-
-
-
batteries can result in serious damage to health.
Introduction / Safety advice
