4
GB
Introduction
Please read carefully and completely through these ope-
rating instructions and fold out page 3, the page with the
illustrations. These operating instructions form part of the
product and contain important information about bringing
the product into use and its handling. Always observe all
the safety advice. If you have any questions or are unsure
of how to handle the device please consult our Internet
page at www.dexaplan.com or contact our service centre
(see the section about “Service”). Keep these instructions
and if necessary pass them on to a third party.
Proper use
This alarm and emergency telephone dialler is intended
exclusively for use in internal rooms in private houses.
The power for the alarm unit is provided by the supplied
9V DC mains adapter connected to the 230V ~ AC, 50 Hz
mains supply. A 9 volt block backup battery (not included)
ensures the functions are retained if the mains supply is
interrupted. For the dialling function to work connection
to an analogue telephone line is required.
This alarm and emergency telephone dialler can be armed
and disarmed using the keypad or the remote control.
A programmable entry delay and an exit delay allow you
to arm or disarm the unit from within the monitored area.
The motion detector integrated into the alarm unit reacts
to the motion of people in the monitored area. On alarm
the alarm unit dials the telephone numbers you have
preprogrammed into it. In addition the siren integrated
into the alarm unit can give off an audible alarm sound.
The alarm can also be triggered immediately by a panic
button.
Alternatively the unit can be set to give a gong chime on
detection of motion.
The manufacturer shall not be liable for damage caused
by improper use or incorrect operation.
Included items
See Fig. A
Q
1x Alarm unit BA 611
W
2x Masking stickers
E
2x Screws for alarm unit
R
2x Dowels for alarm unit
T
1x Remote control BA 611 R
T
a 1x Battery CN23 A, 12V alkaline
Y
1x Telephone cable adapter (only included in
some countries)
U
1x Telephone connection cable (approx. 2 m,
with RJ11 plug)
I
1x Mains adapter with approx. 1.8 m cable
1x Operating instructions
Features and equipment
Alarm unit BA 611
See Fig. B
O
Telephone line connection “LINE”
P
Telephone connection “PHONE”
See Fig. C
{
Motion detector (PIR)
}
Power LED
q
LED for low battery / detection
w
LC display
e
Number keys 0 to 9
r
“PROG” key
t
“PAUSE” key
y
“OK” key
u
“PANIC” key
i
key
o
key
See Fig. D
p
Siren
[
Mains adapter connection socket (9V)
]
Gong On / Off switch
See Fig. E
A
Connection compartment cover
S
Screw for connection compartment cover
D
Screw holes for mounting
F
Connection terminals
G
Recess slot
H
Battery compartment
J
Screw for battery compartment cover
K
Battery compartment cover
L
Battery connector
Remote control BA 611 R
See Fig. F
:
“PANIC” key
a
Check LED
s
“
” key for arming device
d
“
” key for disarming device
See Fig. M
f
Battery compartment cover
Introduction
