DEWESOFT CAM-BOX Manual Download Page 5

Page: 5 / 59

power-over-ethernet option
the best performance with SIRIUS S-BOX
IP67 version available
color and monochrome

DS-CAM-600bw/c

has the following specifications:

1920x1080 (HD) at 300 fps
640x480 (VGA) at 600 fps

Applications

All

DS-CAM

cameras were designed to be high-shock and vibration resistant.

The

DS-CAM

cameras can run in triggered (sync) and free-run mode. The video is captured by real-time data streaming, even at full

resolution! Therefore, a Gigabit-Ethernet port is required.

The system requirements for GigE cameras are:

Gigabit Ethernet LAN port

Dewesoft X

(Clock possibility)
Core2Duo CPU

The applications at which the cameras are used:

machine diagnostic
product quality check
non-destructive testing
research and development
automotive crash testing
impact tests
logistics and transportation
manufacturing

Specifications

If you have multiple

DS-CAM

cameras, we can provide adapters for syncing, powering, and connecting multiple cameras to

Dewesoft instruments.

CAM-BOX

Adapter box for connecting one

DS-CAM-88/120

to the Dewesoft instrument. Combines Sync and Power to the camera connector.

CAM-BOX1

Summary of Contents for CAM-BOX



























































Search results

Summary of Contents for CAM-BOX

Reviews:

Related manuals for CAM-BOX

Brands by name

Popular brands

DEWESOFT CAM-BOX, Manual

Search results

Summary of Contents for CAM-BOX

Reviews:

Related manuals for CAM-BOX

Brands by name

Popular brands