example of a signal when knocking with a finger on the sensor.
If the Counter section is not visible in the first place, please add them with the plus button from the top. The Counter is set to
Event
Counting, Basic
Event Counting
by default, which is ok. Please
enable the button
on the left of e.g. CNT2/IN0.
The trigger setup looks like shown below. We select fast on trigger, rising edge with a level of 1g. The pre-time is 100ms, post time
500ms. Dewesoft supports complex trigger conditions, such as simple edge, filtered edge, window, pulse width, slope, delta
amplitude, as well as any logical combination on any analog / digital / math channel.
52
