Dewert User Manual DX1 Series– Updated 05.2021/1 MDR Page 10 of 16
The motor is equipped with a thermal protective switch as standard. This causes the motor to cut out if the weight
load is too extreme
or the motor’s duty cycle (DC: 25 s/400 s) is exceeded. The table should be ready for use again
after a 15-minute rest period. There is, therefore, no risk of overloading the motor.
The mechanics of the tables have been designed with extensive safety margins in mind.
The max. patient weight is provided with a 4-fold static safety factor, i.e. the design has been fully tested for a 4-
fold load.
4.2 Technical data for electric motor
Manufacturer:
Hanning Elektro-Werke GmbH & Co, D-33813 Oerlinghausen
Type of motor:
SL 95
Type of actuator:
Brushless asynchronous industrial motor
Mode of operation:
Electromechanical linear motor with maintenance-free lifetime lubrication
Intermittent duty
– installed thermal switch
Electronic activation with internal supply for the control element
Duty cycle (DC): 25 s / 400 s
i.e. move the table for max. 25 seconds under nominal load, then observe
a break of at least 400 seconds.
Nominal voltage:
220
– 240 V, 1-50/60 Hz
Nominal consumption:
850 W
Current consumption:
3.7 A
Protection class:
II (protective insulation), connecting cable without protective conductor
Protection rating:
IPX4
– resistant to water splashes,
Degree of protection:
B
The motor is maintenance free.
When operated with sinusoidal alternating voltage, the motors used do not cause field or line-borne interference
within the meaning of EN 50081, Part 1 and 2, nor can their function be impaired by electromagnetic influences
within the meaning of EN 50082, Part 1 and 2.
4.3 Technical data for hydraulic system
Manufacturer:
Power-Packer Europa B.V., NL-7575 AT Oldenzaal
Type:
Compact MK5 long
Mode of operation:
Hydraulic cylinder with pump
The hydraulic unit is maintenance free.
5. Cleaning instructions
Upholstery covering
There are two different collections of upholstery covering to choose from:
•
Skai Pandoria Plus (manufactured by Hornschuch/Continental in Germany)
•
Skai Toronto EN (manufactured by Hornschuch/Continental in Germany)
•
For cleaning and disinfection, a selection of agents from various manufacturers has been tested for
compatibility. Please refer to the separate enclosed sheet.
The table is equipped as standard with the
Dewert hygiene standards
, which enable optimal cleaning and
disinfection:
•
Hinge lids are made of the identical upholstery covering
•
All undersides of the upholstery parts are coated with an upholstery covering and can thus be cleaned
and disinfected
