ECO BETADRIVE ECO
Installation
81417 3.0
17
Second example: Clevis
Figure 9
Installing the drive (example)
A
Clevis
B
Adaption mechanism of the end product
C
Mounting bolt
D
Safety clip
E
Actuating block
F
Self-tapping screw
Ø
6,3 x max.25mm
(DIN EN ISO 1478)
G
Bracket for securing the drive
In the following example, installation of the ECO BETADRIVE ECO into the end product is shown
using.
Certain details may change as a result of technical changes.
Figure 10
Steps for installing the clevis (example)
1
Move your product into a position where it is supporting no load.
2
Push the drive's clevis (
A
) onto the bracket (
G
).
3
Insert the mounting bolt (
C
) into the bracket (
G
).
4
Secure the mounting bolt (
C
) with the safety clip (
D
).
5
Screw the adaptive mechanism
(B)
to the actuating block
(E)
.
Use self-tapping screws
Ø
6.3 x max.25 mm (DIN EN ISO 1478).
Recommended torque
for the self-tapping screws: Max. 6 Nm
6
You may now connect the ECO BETADRIVE ECO electrical connection
1
2
3
C
A
G
D
E
F
B
B
