background image

ECO BETADRIVE ECO 

Safety Instructions 

81417 3.0 

2. 

Safety Instructions

2.1 

Proper and Intended Usage 

The ECO BETADRIVE ECO is meant to be installed in a furniture product. 

  It provides motor adjustment capabilities for movable  parts. It should be used in conjunction 

with suitable fitting brackets and mechanics. 

  It can be used for such applications as beds and chairs. 

  CAUTION 

Risk of accident 

This drive should only be used for the applications described above. Any other form of usage is 
not permitted and can lead to accidents or destruction of the unit. Such non-approved applica-
tions will lead immediately to the expiration of all guarantee and warranty claims on the part of 
the end-product manufacturer against the manufacturer.

 

Improper usage 

Be sure to follow the notices below concerning improper usage. You should include them in your 
product manual in order to inform the users of your end product. 

The ECO BETADRIVE ECO should not be used: 

  in any environment where combustible or explosive gases or vapours (e.g., anaesthesiology) 

may be present, 

  with pulling or pushing forces that exceed those specified on the ratings plate, 

  in a moist environment, 

  outdoors, 

  in any application that will be cleaned with an automated washing system. 

The ECO BETADRIVE ECO drive can be used by children of 8 years and older, persons with re-
duced physical, sensory or mental capabilities, or persons with lack of experience or knowledge 
when they are supervised or instructed concerning the safe use of the device and when they un-
derstand the resulting risks. Do not allow children to play with this device. The cleaning and user 
maintenance must not be carried out by children without supervision. 

  You should only use spare parts which have been manufactured or approved by DewertOkin. 

Only these parts will guarantee a sufficient level of safety. 

2.2 

Selection and qualification of personnel 

The installation of the drive in the end product may only be performed by qualified personnel. 

 

Summary of Contents for ECO BETADRIVE ECO Series


























Reviews: