38
E N G L I S H
Cleaning
Keep the ventilation slots clear and regularly clean the housing with a soft
cloth.
• Unplug the charger before cleaning the housing with a soft cloth.
• Remove the battery pack before cleaning your power tool.
• Regularly clean the table top.
• Regularly clean the dust collection system.
Avoid the use of cleaners or lubricants to maintain the tool.
In particular spray and aerosol cleaners may chemically attack
the plastic lower guard.
Cleaning and maintaining the kerf plate (fig. U)
Regularly clean the area below the kerf plate.
If the kerf plate is worn it must be replaced.
• Remove the screws (67) holding the kerf plate (32).
• Remove the kerf plate and clean the area below.
• Re-install the parts of the kerf plate and the screws.
• Tighten the screws hand-tight.
• To adjust the kerf plate, proceed as follows:
• Pull down the head until the blade just enters the saw kerf.
• Adjust each part of the kerf plate to fit closely to the teeth of the blade.
• Tighten the screws.
Environment
Rechargeable battery pack
This long life battery pack must be recharged when it fails to produce
sufficient power on jobs which were easily done before. At the end of its
technical life, discard it with due care for our environment:
• Run the battery pack down completely, then remove it from the tool.
• NiCd and NiMH cells are recyclable. Take them to your dealer or a
local recycling station. The collected battery packs will be recycled or
disposed of properly.
Unwanted tools
Take your tool to an authorised D
E
WALT repair agent where it will be
disposed of in an environmentally safe way.
GUARANTEE
• 30 DAY NO RISK SATISFACTION GUARANTEE •
If you are not completely satisfied with the performance of your
D
E
WALT machine, simply return it within 30 days, complete as
purchased, to the point of purchase, for a full refund or exchange.
Proof of purchase must be produced.
• ONE YEAR FREE SERVICE CONTRACT •
If you need maintenance or service for your D
E
WALT machine, in the
12 months following purchase, it will be undertaken free of charge at
an authorized D
E
WALT repair agent. Proof of purchase must be
produced. Includes labour and spare parts for Power Tools.
Excludes accessories.
• ONE YEAR WARRANTY •
If your D
E
WALT product becomes defective due to faulty materials or
workmanship within 12 months from the date of purchase, we
guarantee to replace all defective parts free of charge or, at our
discretion, replace the unit free of charge provided that:
• The product has not been misused.
• Repairs have not been attempted by unauthorized persons.
• Proof of purchase date is produced.
This guarantee is offered as an extra benefit and is additional to
consumers statutory rights.
For the location of your nearest authorized D
E
WALT repair agent,
please use the appropriate telephone number on the back of this
manual. Alternatively, a list of authorized D
E
WALT repair agents and full
details on our after-sales service are available on the Internet at
www.2helpU.com.
Summary of Contents for DW017
