DeWalt DCGG571, Manual

Page: 47 / 208

ENGLISH
45
air vents. Wear approved eye protection
and approved dust mask when
performing this procedure.
WARNING: Never use solvents or
other harsh chemicals for cleaning the
non-metallic parts of the tool. These
chemicals may weaken the materials
used in these parts. Use a cloth
dampened only with water and mild
soap. Never let any liquid get inside the
tool; never immerse any part of the tool
into a liquid.
CHARGER CLEANING INSTRUCTIONS
WARNING: Shock hazard. Disconnect
the charger from the AC outlet before
cleaning. Dirt and grease may be
removed from the exterior of the charger
using a cloth or soft non-metallic brush.
Do not use water or any cleaning
solutions.
CLEANING CONTAMINANTS FROM THE GREASE GUN
Cleaning Contamination from the Check Valve
(fig. 12)
Should the grease gun fail to dispense grease, the
check valve (y) should be cleaned.
1. Remove the check valve plug (bb), then the disc
(ee), spring (dd) and check valve ball (cc).
2. Clean the ball (cc) and the check valve area in
the main casting.
3. Reinstall the ball (cc), the spring (dd), and then
the disc (ee).
4. After all grease is cleaned from the area, reinstall
the check valve plug (bb).
Cleaning Contamination from the Filter
(fig. 2, 13)
Should the grease gun fail to dispense grease, clean
the filter (v).
NOTE: If there is still grease in the tube, open the
purge valve prior to pulling the tube handle.
1. Pull the grease tube handle (l) out as far as it will
go, then secure the grease tube rod (m) into the
retaining slot (o) by moving the rod to the side.
Ensure the rod is placed securely in the slot to
prevent it from disengaging.
2. Unscrew the grease tube assembly (n) from the
grease gun and remove.
3. Using a small flat-blade screwdriver or pick,
carefully pop out the filter.
4. Wipe off the filter using a soft cloth. If the filter
still has debris in it after wiping, a soft brush or
swab may be used.
5. Once clean, reinsert the filter into the round
groove, ensuring it is fully seated, and reattach
the grease tube assembly to the grease gun.
Optional Accessories
WARNING: Since accessories, other
than those offered by D
E
WALT, have
not been tested with this product, use
of such accessories with this tool could
be hazardous. To reduce the risk of
injury, only D
E
WALT recommended
accessories should be used with this
product.
Consult your dealer for further information on the
appropriate accessories.
Protecting the Environment
Separate collection. This product must
not be disposed of with normal
household waste.
Should you find one day that your D
E
WALT product
needs replacement, or if it is of no further use to you,
do not dispose of it with household waste. Make this
product available for separate collection.
Separate collection of used products
and packaging allows materials to be
recycled and used again. Re-use of
recycled materials helps prevent
environmental pollution and reduces
the demand for raw materials.
Local regulations may provide for separate collection
of electrical products from the household, at
municipal waste sites or by the retailer when you
purchase a new product.
D
E
WALT provides a facility for the collection and
recycling of D
E
WALT products once they have
reached the end of their working life. To take
advantage of this service please return your product
to any authorised repair agent who will collect them
on our behalf.
You can check the location of your nearest
authorised repair agent by contacting your local
D
E
WALT office at the address indicated in this
manual. Alternatively, a list of authorised D
E
WALT
repair agents and full details of our after-sales
service and contacts are available on the Internet at:
www.2helpU.com .