background image

ENGLISH

12

Lubrication

Your power tool requires no additional lubrication.

Cleaning

 

  

WARNING:

 Blow dirt and dust out of 

the main housing with dry air as often as 
dirt is seen collecting in and around the 
air vents. Wear approved eye protection 
and approved dust mask when 
performing this procedure. 

 

  

WARNING: 

Never use solvents or 

other harsh chemicals for cleaning the 
non-metallic parts of the tool. These 
chemicals may weaken the materials 
used in these parts. Use a cloth 
dampened only with water and mild 
soap. Never let any liquid get inside the 
tool; never immerse any part of the tool 
into a liquid.

Optional Accessories

 

  

WARNING:

 Since accessories, other 

than those offered by D

E

WALT, have 

not been tested with this product, use 
of such accessories with this tool could 
be hazardous. To reduce the risk of 
injury, only D

E

WALT, recommended 

accessories should be used with this 
product.

Consult your dealer for further information on the 
appropriate accessories.

Protecting the Environment

   Separate collection. This product must 

not be disposed of with normal 
household waste.

Should you find one day that your D

E

WALT product 

needs replacement, or if it is of no further use to you, 
do not dispose of it with household waste. Make this 
product available for separate collection.

   Separate collection of used products and 

packaging allows materials to be 
recycled and used again. Re-use of 
recycled materials helps prevent 

environmental pollution and reduces 
the demand for raw materials. 

Local regulations may provide for separate collection 
of electrical products from the household, at 
municipal waste sites or by the retailer when you 
purchase a new product. 

D

E

WALT provides a facility for the collection and 

recycling of D

E

WALT products once they have 

reached the end of their working life. To take 
advantage of this service please return your product 
to any authorised repair agent who will collect them 
on our behalf. 

You can check the location of your nearest 
authorised repair agent by contacting your local 
D

E

WALT office at the address indicated in this 

manual. Alternatively, a list of authorised D

E

WALT 

repair agents and full details of our after-sales 
service and contacts are available on the Internet at: 

www.2helpU.com

Summary of Contents for D28492

































Reviews: