manualshive.com logo in svg

Devolo MicroLlink, User Manual, Page: 53 / 67

Share
Download
Devolo MicroLlink User Manual Download Page 53

|

  

AT commands: Detailed description

53

|

 devolo MicroLink ISDN i 

|

EN

or, if the short form has been set:

2;0241938800

1;0241938800

70;0241938800

In addition, the target EAZ or target MSN used by the remote station can be 
displayed.  This setting is also made in register S153

Example

RING;0241938800;MSN

CONNECT messages

The CONNECT messages, i.e. the messages regarding a successful connec-
tion, are influenced by the AT-M, AT\V and ATX commands.

NO CARRIER

The cause of the failed connection may also be displayed together with the 
“NO CARRIER” message (see also register S153).

Example

NO CARRIER;053;016 = normal cancellation of the connection by the remote 
station.

The following table provides an overview of the CONNECT messages that 
may be displayed during ISDN operation:

Short form

Plain text

60

CONNECT 1200

61

CONNECT 2400

62

CONNECT 4800

63

CONNECT 9600

64

CONNECT 19200

65

CONNECT 38400

66

CONNECT 48000

67

CONNECT 56000

68

CONNECT 56000/REL

69

CONNECT 64000

70

CONNECT 64000/REL

Summary of Contents for MicroLlink




































































Reviews:

No comments