|
AT commands: Detailed description
33
|
devolo MicroLink ISDN i
|
EN
This command can be used to set the modem to respond to busy signals on
outgoing connections with the messages NO CARRIER or BUSY.
The command
ATX0
is also relevant for messages returned during call estab-
lishment. Regardless of the speed or type of connection, only the messages
CONNECT (plain text) or 1 (short form) are issued.
\X
Handling of XON/XOFF
*AT\X0
: XON/XOFF characters are not sent
AT\X1
: XON/XOFF characters are sent
This command affects the handling of the XON and XOFF characters used for
flow control when XON/XOFF software handshaking is selected (see also
AT\Q
).
When
AT\X0
is set, the XON/XOFF characters are used solely to control the
data flow between the local MicroLink ISDN i and the computer and are not
sent to the remote system.
When this is set to
AT\X1
, these characters control the data flow between
the local MicroLink ISDN i and computer and are sent to the remote system.
&Y
Set pointer to configuration profile
*AT&Y0
:Set pointer to configuration profile to 0
AT&Y1
:Set pointer to configuration profile to 1
This command is used to set a pointer to one of the two stored configuration
profiles (0 or 1). The marked configuration profile is loaded when switching
the adapter on or during an initialization triggered by the transition of DTR
from ON to OFF (see command
AT&D
).
Z
Load configuration profile
ATZn
: Load configuration profile n (n = 0, 1)
Summary of Contents for MicroLlink
Page 1: ...MicroLink ISDN i...
