17
HDS9336
The information on the LCD screen will switch to
the PIP picture-in-picture setting, which can be
set as required after pressing the knob. As
shown on the right
You can use the knob to set the PIP picture-in-picture parameters, as follows (the horizontal
position/vertical position size is based on the smallest display image).
Horizontal position setting: The value from the upper left end to the upper right end is 0-140,
and the value will increase/decrease by 10 for each division of the knob.
Vertical position setting: The value from the upper left end to the lower left end is 0-810, and
the value increases/decreases by 10 every time you turn the knob.
Display size setting: You can choose small/medium/large settings.
Border switch setting: You can choose the on/off setting.
Border width setting: The border width can be selected from 2-7 thickness borders, and the
value will increase/decrease by 1 every time you turn the knob.
Border color setting: You can choose white/red/green/green to set the border color.
PIP size and position
POP
Picture out picture effects
Picture out picture effect: Press
on the control panel (the green light is displayed
after pressing), then click the CUT button or use the T-bar or AUTO to switch. The effect
diagram is as follows
The information on the LCD screen will switch to
the POP picture outside picture setting, which
can be set according to your needs after pressing
the knob. As shown on the right
PIP
Screen Select 1
Horizontal
0
Vertical 0
Display Size Small
Border switch ON
Border width 2
Border color Green
