16
HDS9336
WIPE special effects transition
There are four transition methods for Wipe
Up wipe transition effects, the A picture remains unchanged,
and the B picture moves through the upward direction.
Gradually move in until the picture becomes a B picture
PIP Picture in Picture Special Effects
Picture-in-picture effect: Press
on the control panel (the green light will be
displayed after pressing), then click the CUT button or use the T-Bar or AUTO to switch.
The effect diagram is as follows
Up transition: Click
in the special effect control area (press and display a green
light), then click in the special effect control area (press and display a green light), and
then click the CUT button or use the T-bar or AUTO to switch. The effect diagram is as
follows, the other three transition operations are the same.
Adjustment of transition rate
When operating the transition special effect control area, you can control the transition
rate by operating RATE1, RATE2, and RATE3 in the key panel. Note: The effect is only
available when using AUTO transition
4.1.2.4 Integrated control area
Optimize the PIP/POP implementation method. When the PIP/POP
function is turned on, the PGM main screen will be superimposed on the
PVW preview screen, and then the live broadcast will be cut out;
