26
HDS9336
6
.
System Menu Setting
There is a status menu display in the lower right corner of the device's multiview, and the
device status is displayed by default when it is turned on;
CH1/CH2/CH3 source indicates the current mixing channel status of the device;
The monitor source represents the audio channel currently being monitored;
The SDI OUT2 interface can customize the PGM/PVW output and switch through the knob;
The audio mode corresponds to the selection of mixing and following, which can be
selected through the knob;
The output resolution is the PGM output of the corresponding device, which can be
switched by the knob, 1080I50/60, and 1080P24/25/30/50/60;
In the power-on default state, press the knob to enter the main menu, as shown in the
figure below.
Status
CH1 SRC SDI1
CH2 SRC SDI2
CH3 SRC SDI3
Listen SRC PGM
SDI OUT 2 PGM
Audio Mode MIX
Output resolution 1080P30
Main Menu
System Setting
IP Setting
Record Setting
Stream Setting
Device Info.
Exit
100
100
100
