37
SWITCHER
Transition effect control area
In the transition effect control area, you can press
MIX (mixed transition), FADE (fade in and fade out
transition) and up, down, left, right, up and down to
six special effect transition settings. As shown below
In the transition control area, you can set the transition
rate. Press RATE1, RATE2, and RATE3 on the panel
to control the transition rate definition. It's effective
only when playing.
Integrated control area
(I) PIP Picture-in-Picture Settings
Press PIP (display green light) in the software
control panel to enter picture-in-picture settings. At
this time, you can set the horizontal position,
vertical position, display size, border switch,
border width, and border color of the screen. As
shown below
(2) STILL screen freeze setting
Press STILL (display green light) in the software
control panel to enter the picture freeze setting. At
this time, you can freeze the live output picture.
Click STILL again to cancel the freeze effect. As
shown below
PGM and PVW selection area
PGM and PVW are preview output and live
broadcast output respectively. You can switch
the input source of the console by clicking the
buttons 1-4 on the software control panel. Where
BAR is the color bar output. As shown below
Note: If the switcher is operated on the device
side, the PC-side interface cannot be displayed
synchronously.
You
must
click
the
synchronization button to control the interface to
display synchronously:
