29
SWITCHER
Click
in the special effect control area (green light is displayed after pressing), and then click
AUTO or CUT or T-bar to switch, the effect picture is below.
FADE in and fade out effects, A gradually darkens the picture
until it is completely black, and then gradually changes from
black to B picture.
Four special effects wipe transitions
There are four types of transition modes in wipe, which are up / down / left / right.
Transition up: Click
in the special effect control area (green light is displayed after
pressing), and then click AUTO or CUT or T-bar to switch. The other three transition operations
are the same.
Wipe up the transition effect, the A picture is unchanged, and the B picture is gradually wiped in by the
upward direction until the picture completely becomes B
Transition rate adjustment
When operating the transition effect control area, you can also
control the transition rate by operating the RATE1, RATE2,
and RATE3 in the keypad (rate1: 640ms; rate2: 1280ms;
rate3: 2560ms) Note: Only when using AUTO transition
effective.
4.1.2.4 Integrated control area
PIP
picture-in-picture special effects
PIP special effects: Press
on the control panel
(the green light is displayed after pressing), and then
click AUTO or CUT to switch. The effect is shown
below.
At this time, the information on the LCD screen will
be switched to the PIP setting. The control menu key
can be set according to requirements, as shown below.
PIP
size and position
FTB emergency black field
The FTB button is defined as the emergency black field screen output, press the button and the green light flashes
to turn on the FTB emergency black field output function, press the button to turn off the green light, and the FTB
emergency black field function is off.
