28
SWITCHER
4.
Volume adjustment of the audio assigned channel: directly press the VOL+/VOL- button in the
audio control area to control the volume, or adjust the position of the audio faders of CH1 and CH2
up and down, the corresponding menu part can also display the current volume. The volume value is
in the range of 0-100. As shown in the figure on the right, the volume of the first channel has
increased from 44 to 100. The operation of adjusting the volume of the second channel of mixing is
the same as that of adjusting the volume of the first channel of mixing.
Volume fader MASTER: Represents the master volume fader, you need to push this fader to the top
in the mix follow mode.
4.1.2.3 T
ransition Effect Control Area
There are 3 transition modes:
MIX transitions, FADE, and Wipes, where the Wipes
include: up, down, left, and right.
MIX Transition
MIX special effects are transition effects. After setting the transition, the main output will fade
from the original live picture and then transition to the new live picture until it completely
disappears.
Click
in the special effect control area (green light is displayed after pressing), and then
click AUTO or CUT or T-bar to switch. The effect is shown below.
MIX transition effects, superimposed on the A picture and
gradually superimposed the B picture, until the transition to the
end, the picture is completely replaced by the B picture
FADE
Transition
