5
ENGLISH
Before first use
Before first use, adjust the height of the pod holder and clean the inside.
Wash the pod tray set and the
outer steam nozzle with water.
Wipe the pod holder thoroughly with a
moist cloth or similar.
1.
Adjust the height of the pod tray
as described below.
①
Place the pod tray set onto the pod
holder.
2.
First, match the “|” mark of
the pod tray with the first dot
to the right of “down” on the
pod holder.
②
Set a coffee pod.
For height adjustment, set a coffee pod onto the
pod tray set.
Set the coffee pod horizontally and with the tab
to the front.
①
③
Lower the handle all the way and
check the hardness.
When the handle is pushed down
strongly, there should be a good re-
sponse when it becomes horizontal.
④
When lowering the handle feels too
hard or too soft, adjust the height of
the pod tray.
1. Raise the pod tray slightly.
2. Turn a little for lowering.
Counterclockwise turning increases the height.
Clockwise turning reduces the height.
②
③
Pod holder
down
up
down
“|” mark of the pod tray
Adjust the height of
the pod tray without
switching the power
on.
Adjust the height with a
coffee pod used by you.
●
Remove the coffee pod after completion of pod tray height adjustment.
Important:
First, the height of the pod tray must be adjusted.
④
Do not yet switch on the power for the
operations on this page.
Softer
Harder
(Lower) (Higher)
Raise
and turn
Tips
Pod holder
Coffee pod
Pod tray set
Tab
(Continued on the next page)
Pod tray
set
