17
ENGLISH
2.
espresso
POWER
steam
POWER
①
②
Descaling (continued)
⑥
espresso
POWER
(Continued on the next page)
Perform the operation without
setting a coffee pod.
When hot water is passed, the
operation noise increases, but
this is normal.
Tips
Tips
⑥
Insert the plug of the power cable into
a wall outlet, then press the espresso
POWER button.
Perform the following operation
after the temperature indication
of the espresso thermometer is
in the green range and the
needle has stopped rising.
⑦
Press the espresso extraction ON/OFF
button.
Press the espresso extraction ON/OFF button
again to stop when the cup is full.
(There is no automatic stop.)
Discard the hot water from the cup
and repeat several times.
Water
Pass hot water through he steam
nozzle to clean it.
①
Press the steam POWER button.
Perform the following operation
after the temperature indication
of the steam thermometer is in
the green range and the needle
has stopped rising.
②
Insert the steam nozzle approxi-
mately half way into a container
with water and press the steam
ON/OFF button.
Always use a milk pitcher with
a handle or similar, as the con-
tainer with water becomes hot.
⑦
③
After steam has been discharged for
approximately 30 seconds, press the
steam ON/OFF button again to stop
the steam.
(There is no automatic stop.)
Replace the water in the container and
repeat several times.
steam
POWER
Please be careful, as the
top of the body becomes
hot during operation.
③
