3
ENGLISH
Installation place
This machine generates steam with high temperature and high pressure to make tasty espresso. This means
that sufficient attention must be paid to the installation place. Directly after use, the extraction opening, the
steam nozzle, the handle part, etc. are extremely hot and sufficient care should be taken not to touch them.
●
Never place this machine on top of or close to elec-
tric products or precision machines.
Water drops, steam, etc. can cause trouble for the
machine underneath.
●
Place the machine only onto a stable surface.
Otherwise this product may drop down and become
damaged.
●
Do not place this product near objects for which
discoloration, deformation, etc. from water drops,
hot water, etc. is to be feared.
Water drops or steam can cause discoloration or
damage.
Cautions for use
Important
●
Never raise the lever during extraction.
Hot water or steam may spray out, which is very
dangerous.
●
Do not switch on the espresso switch or the steam
switch while the water tank is empty.
This can cause defects.
●
During extraction and for some time after it, take
care not to touch hot parts (especially exposed metal
parts) with your skin or with cables.
●
Always empty the water tank after use. The water
can become bad or the water in the tank can freeze
in case of low temperatures, and this can cause de-
fects.
●
Always fill fresh water into the water tank.
Never fill in hot water or milk, coffee, alcohol, juice,
or other liquids than water, as this can cause defects.
●
Connect the power cable to a wall receptacle.
When many appliances are connected to a single out-
let or when extension cables are used, the machine
may not only be able to exhibit its full ability, but
abnormal heating may be caused.
●
When handling metal parts like the float part or the
water tray cover, take care not to hurt yourself on
the edges etc.
●
Do not install the product at places where water
may splash onto it.
This can cause short-circuits.
●
Do not place the product at locations which can be-
come hot because of direct sunlight etc.
The plastic parts may become deformed.
●
Do not place the products at locations where it is
within reach of small children.
Burns or injuries from dropping down can be
caused.
Special care must be taken directly after use that
hot parts are not touched.
Introduction (continued)
Introduction ...................................................... 2
Important Safeguards ......................................... 2
Cautions for use ................................................. 3
Installation place ................................................. 3
Contents ............................................................. 3
Names .............................................................. 4
Before first use ................................................ 5
Preparing espresso coffee ............................... 8
Making milk foam ........................................... 12
How to make good milk foam ........................ 13
Replacement of the water softening resin filter
.................................................................. 14
Servicing after use ......................................... 15
Descaling ........................................................ 16
Cleaning of float part and filter tray set .......... 18
Troubleshooting .............................................. 19
Specifications ................................................. 20
Contents
