Devanco BCSI, Technical Manual Installation Maintenance

Page: 15 / 42

PIVIN & DRAPEAU inc.
15/27
!
3. INSTALLATION PROCEDURE
(for qualified technicians only ) :
IMPORTANT INSTALLATION
INSTRUCTIONS
WARNING – TO REDUCE THE RISK OF
SEVERE INJURY OR DEATH:
1) READ AND FOLLOW ALL INSTALLATION INSTRUCTIONS
2) Install only on a properly operating and balanced gate. A gate that is
operating improperly could cause severe injury. Have qualified service
personnel make repairs to cables, spring assemblies, and other hardware
before installing the operator.
3) Remove all pull ropes and remove, or make inoperative, all locks (unless
mechanically and/or electrically interlocked to the power unit) that are
connected to the gate before installing the operator.
4) Do not connect the gate operator to the source of power until instructed to
do so.
5) Locate the station control: (a) within sight door, (b) at a minimum height of 5
feet so small children cannot reach it, and (c) away from all moving parts of
the door.
6) Install the Entrapment Warning Placard next to the control station in a
prominent location.
7) For products having a manual release, instruct the end user on the
operation of the manual release.