24.5.04
Instruction manual LOCON 7, LOCON 9 V. 10.4
39
Deutschmann Automation GmbH & Co. KG
Technical data
10 Technical data
10.1 Technical data LOCON 7
Technical data
Basic device
Options
Operating voltage
24 volt DC ±20%, max. 100 mA
Via transfer program on PC
Data protection
EEROM (at least 100 years)
no battery required
Programs
4
Number of cams
120 cams, optionally distributable to
channels and programs
Cams are interchangeable linewise
Zero offset
Programmable over the entire range
Position recording
360 inc. absolute encoder SSI gray-
code (resolution 1°)
Incremental encoder 24V or 24V-
metering pulses (initiator)
metering frequency max. 10 kHz
counting area max. 1024
Encoder voltage
24 volt
Outputs
8, short-circuit proof, plus-switching
24 volt/0.3A (max. 1A in total)
Inputs
2 inputs for encoder signals
2 inputs for program selection
For incremental version:
1 input CLEAR+ (1 ms)
1 select-input
2 inputs incremental signals
Cycle time
< 1 ms
Rotational speed of the
encoder shaft
360 inc. encoder:
Error: 1inc
2inc
3inc
4inc
...
--------------------------------------------------
rev/min: 165
333
500
666
...
Programming
Offline via PC
online via PC, TERM 5, TERM 24 or
TERM 32
Displays
8 output displays
2 displays for external ProgSelection1
SSI-control display
1 error display
External encoder position
Interface
RS232 (V. 24)
Installation
DIN-rail mounting
Type of protection
IP24
Dimensions
24 x 79 x 98 (WxHxD)