2
TABLE OF CONTENTS
1.0
SAFETY REGULATIONS .................................... 3
1.1
SAFETY LABELING AND WARNING SIGNS3
1.2
IMPORTANT NOTICE................................... 3
2.0
INSTALLATION ................................................... 3
2.1
GENERAL ..................................................... 3
2.2
POSITIONING .............................................. 4
2.2.1
Installation considerations ..................... 4
2.3
INSTALLATION OF THE COMPONENTS .... 5
2.3.1
Installing the terminal in the wall ............ 5
2.3.2
Insulated flexible venting ....................... 6
2.3.3
Connection to the furnace breech ......... 7
2.3.4
Connection to the vent terminal ............. 7
2.4
CONNECTION OF THE AIR INTAKE PIPE .. 8
2.4.1
Additional parts required (not included in
VTK kit) .................................................. 8
2.4.2
Intake pipe length .................................. 8
2.4.3
Beckett AFII Burner ............................... 8
2.4.4
Beckett NX Burner ................................. 8
2.4.5
Riello 40-BF burner................................ 8
2.4.6
Terminal connection .............................. 8
2.4.7
Intermediate piping ................................ 9
2.5
INSTALLATION OF THE BVSO JUMPER .... 9
3.0
OPERATION ........................................................ 9
3.1
COMBUSTION GAS TEMPERATURE
VERIFICATION ............................................. 9
3.2
BURNER POST PURGE DELAY
ADJUSTMENT .............................................. 9
4.0
MAINTENANCE ................................................... 9
FIGURES
Figure 1: Minimum clearance ............................................... 4
Figure 2: Components identification ..................................... 5
Figure 3: Installation of the terminal in the wall .................... 6
Figure 4: Installation of the stabiliser shroud ........................ 6
Figure 5: Pressure switch location ....................................... 6
Figure 6: Caulking around the stabiliser shroud ................... 6
Figure 7: Installation of the transition / terminal coupling ..... 7
Figure 8: Seams alignment .................................................. 7
Figure 9: Connection to the breech plate ............................. 7
Figure 10: Connection to the vent terminal .......................... 8
Figure 11: BVSO jumper ...................................................... 9
Figure 12: Dimensions ....................................................... 11
Figure 13: Wiring Diagram ................................................. 11
Figure 14: Parts List ........................................................... 12
TABLES
Table 1: Minimum clearance around a vent system ............. 4
Table 2: Maximum and minimum vent pipe length ............... 4
Table 3: Approved furnaces for used with VTK / IFV ......... 10
Table 4: Parts List .............................................................. 12
