1)
Complete points 1-3 on page 4.
2)
Attach the wall mount base to the wall by drilling two holes with a M10*80
drill bit. Secure with the two M12 screws provided.
NOTE: Installation height should be a minimum of 2.5 metres from the ground.
IMPORTANT: Check wall is suitable for mounting and supporting the wall fan.
3)
Insert the BEND TUBE through the two “U” shape slots provided in the wall
mount base & lock them into position using the two screws provided.
NOTE: The Bend tube can be positioned either upwards or downwards. You must orient
female support upward by removing the screw, repositioning & resecuring. Never attach
the fan so it is hanging below the female supporter.
PAGE 8
PAGE 5
WALL FAN ASSEMBLY
ELECTRICAL DIAGRAM
SPECIFICATIONS
(FRONT VIEW)
Model Description
Size
(mm)
Volt
(V~)
Freq
(Hz)
Watts
(W)
Air Flow
(m
3
/min)
DFS75 Pedestal Fan 750
220-240 50
280
290
DFB75 Wall Fan
750
220-240 50
280
290
The data above is for reference only and may change without notice
Wall
Wall mount base
Fixing bolts
Bend Tube
Cement
Washer
Spring Washer
Nut
Install the screw
