DETROIT DFS75, Operating Instructions Manual

Page: 4 / 6

PAGE 4 PAGE 9
1) Fit REAR GUARD of fan onto the MOTOR and secure
with 4 screws provided. Ensure screws are tight to avoid
vibration noise
2) Fit BLADE to shaft and lock blade SET SCREW.
3) Fit FRONT GUARD to rear guard using clips provided.
4) Fit OUTER TUBE onto CAST IRON BASE and secure
with the BOLT. Then fit COVER RING onto CAST COUPLING.
5) Screw out PLASTIC KNOB on column then fit INNER
TUBE. Secure grub screw with key.
6) Fit MOTOR onto MALE SUPPORTER. Adjust to
suitable height at coupling then lock the MALE SUPPORTER SET
SCREW.
7) Secure locking screw on FEMALE SUPPORTER for
desired head angle / tilt. To adjust the head tilt, loosen the nut
above the female support, then re-secure the nut after adjust-
ment.
EXPLOSION VIEW & PARTS BREAKDOWN
PEDESTAL FAN ASSEMBLY
FEMALE SUPPORTER
SET SCREW
INNER TUBE
COUPLING
OUTER TUBE
CAST COUPLING
CAST IRON BASE
PLASTIC KNOB
MALE
SUPPORTER
SHAFT
OSCILLIATING
ADJUSTMENT
SCREW MOTOR
REAR GUARD
BLADE
SET SCREW
FRONT GUARD
13
15
19
20
21
1
5
14
6
7
8
9, 10, 11, 12.
2, 3, 4.
18, 17, 16.
Serial No. Item No. Des. QTY Spec./Material Remark
1 FS-75-050-000-000 Cross base 1 600/HT100 Spray coating
2 FS-75-040-030-000 Washer 1 D60 d12.5 §3 Plate color zinc
3 GB593-85 Spring washer 1 ∮ 12 Plate color zinc
4 GB5780-86 Hex bolt 1 M12X40 Spray coating
5 FS-75-040-000-000 Supporting tube 1 Plate color zinc
6 GB818-85 Cross screw 1 M6X12 Spray coating
7 FS.FB-75-040-040-000 Under connector 1 HT-100
8 GB818-85 Cross screw 1 M6X12 Plate color zinc
9 GB95-85 Washer 1
∮
12 Plate color zinc
10 GB593-85 Spring washer 1 ∮ 12 Plate color zinc
11 GB52-76 Hex nut 1 M12 Plate color zinc
12 GB30-76 Hex bolt 1 ∮ 12X40 Plate color zinc
13 FS.FB-75-070-020-000 Rating label 1 Label Plate color zinc
14 Power outlet 1
RVV 2X0.75+0.75M
2 Plate color zinc
15 FS.FB-75-011-000-010 Motor assembled indication 1 Plate color zinc
16 FS.FB-75-011-070-000 Fit washer 4 D15 d6.5 h1.5 2M Cord
17 GB593-85 Spring washer 4 ∮ 6 Plate color zinc
18 GB818-85 Cross screw 4 M6X16 Plate color zinc
19 FS.FB-75-030-000-000 Fan blade 1 Aluminum Plate color zinc
20 FS.FB-75-020-020-000 Front net 1 Spray coating
21 FS.FB-75-020-010-000 Back net 1 Spray coating
22 FS.FB-75-070-040-000 Net label 1 Aluminum Spray coating