4)
Insert the motor into the female support and secure with the screw.
5)
Secure locking screw on FEMALE SUPPORTER for desired head angle / tilt. To
adjust the head tilt, loosen the nut above the female support, then re-secure the nut after
adjustment.
WARNING! Make sure all parts are assembled correctly and connections are tight.
WARNING! If supply cable to too tight the oscillating motion can cause damage - ensure
sufficient section of cable to avoid damage.
ENVIRONMENT OF USE
1) The max relative humidity is 90%(when in 25
℃
)
;
2) Below 1000 metres altitude.
OPERATION
1) Make sure the Fans voltage is in accordance with local voltage before use.
2) The fan is recommended for use in ordinary indoor situations, but not at high humidity.
3) To turn on select the desired speed setting
0 - Off
1 - Slow
2
- Medium
3
- Fast
4) For fixed air flow ensure the swing arm is not connected to the fan motor
5) For oscillating air flow ensure the swing arm is connected to the fan motor by rotating
the oscillating adjustment screw in an anti-clockwise direction.
6) Unplug the fan when not in use.
WALL FAN ASSEMBLY CONTINUED
PAGE 6
PAGE 7
FIG 4
– The fan head in the OSCILLATION
posi
ti
on. Oscilla
ti
on is 0-90
°.
FIG 3
– For an OSCILLATING fan head, turn the
OSCILLATING ADJUSTMENT screw an
ti
clockwise
to a
tt
ach SWING ARM to fan head
FIG 1
– The fan switch on the OFF posi
ti
on
FIG 2
– The fan head in the FIXED air
fl
ow
posi
ti
on
SWING ARM
MAINTENANCE
3) To ensure prolonged safe use ensure you have this unit inpected, cleaned & moving
parts lubricated by a qualified person after every 1000 hours of use.
4) Regularly inspect the cord & plug & do not use if damaged. A lisenced electrician is
required to repair or replace the cord & plug.
5) Any other repairs or maintenance must be performed by a qualified person.
LOCATING SCREW
FEMALE SUPPORTER
FAN HEAD