DETROIT 471952 Operator'S Manual Download Page 25 | Manualshive

Page: 25 / 84

background image

1. Make sure the transmission is filled to the proper level with the fluid

recommended by the transmission manufacturer. Do not overfill.

2. The Diesel Exhaust Fluid (DEF) must be checked and filled regularly with

DEF meeting Detroit™ quality specification, Refer to section "Diesel Exhaust
Fluid Availability".

3. Make sure cable connections to the storage batteries are clean and tight.
4. Check batteries, Refer to section "Inspection of the Batteries".

Starting the Engine for the First Time

To start the engine, the transmission should be in neutral and the ignition key
turned to the ON position.
At the start of every ignition cycle, the instrument panel indicator lights will come
on. This is the result of the electronic engine control system, called Detroit Diesel
Electronic Control® (DDEC®), diagnosing the system to ensure everything is
functional, including the cluster for the warning indicators. If no faults are detected,
all indicators will go out in approximately five seconds.
The warning indicators must go out before starting the engine. If the warning
indicators stay on, or do not come on momentarily after turning on the ignition,
contact an authorized Detroit™ service outlet. Operating the engine under these
circumstances may result in engine damage.

Engine Start and Routine Operation

Starting the Engine

Check as follows:
Before starting the engine, carefully read all operating instructions in this manual
and do all the recommended pre-trip inspections and daily maintenance. Check the
coolant level, Refer to section "Inspection of the Cooling System". Check the
lubricating oil level, Refer to section "How to Check the Lubricating Oil Level".
Check fuel levels, and drain contaminants from the fuel coalescer, Refer to section
"How to Drain the Fuel Coalescer".

1. Place the transmission in neutral, and set the parking brake.
2. Turn on the ignition (key ON, engine OFF).
3. Wait for the engine warning indicators on the instrument panel to go out.

Gen 5 DD Platform Operators Manual

All information subject to change without notice.

25

DDC-SVC-MAN-0217

Copyright © 2020 DETROIT DIESEL CORPORATION

«
...
23
24
25
26
27
...
»

Summary of Contents for 471952





















































































Reviews:

No comments

Related manuals for 471952

Brand: Mack Pages: 303

Brand: Painless Performance Pages: 24

90000 I/C 525 Series

Brand: Briggs & Stratton Pages: 16

Brand: Turnigy Pages: 2

HP525 EFI Bravo Sterndrive Series

Brand: Mercury Racing Pages: 147

Brand: Wood-mizer Pages: 36

Brand: Yamaha Pages: 25

Brand: Yamaha Pages: 18

Brand: Yamaha Pages: 50

Brand: Yamaha Pages: 62

Brand: Yamaha Pages: 59

Brand: Yamaha Pages: 64

Brand: Yamaha Pages: 66

Brand: Yamaha Pages: 66

TRANSERVO SSC04

Brand: Yamaha Pages: 80

Brand: Yamaha Pages: 76

Brand: Yamaha Pages: 104

Brand: Yamaha Pages: 118

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands