Programming Manual
Conditioner CDT-404-2 / Touchscreen ETC1
English
Page 5/24
PROG404CDT-404-2-EN – Index B
The settings on the identification page are now filled in
:
In order to verify that the detector is properly connected, the needle must be moved from
side to side to see the
sensor value
.
–
Detector input number
Software version of
the conditioner
Identification number of
detector input 1
Real-time value of the detector.
To verify that the detector is
properly connected, simply
move the needle to see the
value change.
The sensor value
changes in + and in –
around zero
