Programming Manual
Conditioner CDT-404-2 / Touchscreen ETC1
English
Page 6/24
PROG404CDT-404-2-EN – Index B
3. Parameterization of the detector
The second step is to parameterize the detector.
After the conditioner has been identified, the control page appears as below:
PRESS ICON
The home page appears :
PRESS ICON
Here is the setting page of the
detector - 1st Level:
Detector input number –
Each detector
can be set differently.
This setting is present for each level.
Direction of rotation of the first control:
Clockwise or Anticlockwise
Control mode :
Presence of tool - Absence of part –
Presence/Absence – Absence/Presence
Number of control : 1 or 2
Lift allowing access to other levels of
parameterization.
Control : Associated ou Dissociated
