Programming Manual
Conditioner CDT-404-2 / Touchscreen ETC1
English
Page 14/24
PROG404CDT-404-2-EN – Index B
The
configuration
page,
General
tab
Logical outputs
This parameter makes it possible to configure according to 4 states acting on the logic
outputs when there is manipulation in the menus:
-
Inactive 60S
:
The machine will not stop automatically when entering the setting mode.
After 60 seconds without touching the screen, it automatically returns to measurement
mode.
-
Inactive INF
: the same as for adjustment INACTIVE 60S; but without automatically return
to control mode
.
-
Active 60S
:
The machine will stop automatically when entering the setting mode
(Switching output "Shutdown Machine"). After 60 seconds without touching the screen, it
automatically returns to control mode.
-
Active INF
: : the same as for adjustment ACTIVE 60S; but without automatically return to
control mode
.
Good Control
This parameter makes it possible to configure the state maintained or not of the output
"Good control " between 2 top Control
:
-
Stored
:
When the control is OK, the output "Good Control" closes and remains closed until
the next Control top. The output status is stored.
-
Not stored
:
When the control is OK, the output "Good Control" closes for 50ms minimum
and then reopens. The status of the output is not stored.
Chips
This parameter makes it possible to configure the state maintained or not of the output
"Chips " between 2 top Control
:
-
Stored
:
When a chip is detected, the output “Chips” closes (or opens if NC) and remains
closed until the next Control top. The output status is stored.
-
Not Stored
:
When a chip is detected, the output “Chips”closes (or opens if NC) for 50ms
and re-opens. The status of the output is not stored.
Ref. start
This parameter is used to define if Yes or No a reference on the tool muste be made when
the system is started. If the parameter is YES, at power-on a reference must be made before
the cycle can be started. If the parameter is No, when the power is turn on , the cycle can
start without a reference be made.
