3300-0329-0M Rev C
y
apex Portable Scale Owner’s
34
EVENT COUNTER
Your apex® Portable Scale with Remote Indicator has been designed with an Event Counter
type of security seal. When selected, the scale will display two numbers representing the
Calibration and Configuration counters.
Calibration Counter (
!
)
The calibration counter is incremented when a value in the calibration part of setup is
changed (
$
,
-0;
,
3
,
*9
,
-!;
,
00#;
,
'%#
,
!
,
9<
,
&($
). The counter is only
incremented 1 time even if more than one parameter is changed in setup.
Configuration Counter (
+
)
The configuration counter is incremented when a value in the configuration part of setup is
changed (
$'#
,
#;9
,
*9
,
*9
,
'*2
,
(9
,
00;
,
3(
,
#'9
,
00)0
,
*
,
*`;
,
6/3
). The counter is only incremented 1 time even if more than one parameter is changed
in setup.
To Review the Event Counter:
1. Press the key to turn the scale on.
2. The scale will perform a display test (turn on all segments and annunciators), and then
change to the show the software revision for a few seconds.
3. Next, the display will change to the Weight Display with the
Æ
0
Å
(ZERO) and
[\
(STABLE) annunciators turned on to show a stable, center-of-zero weight condition.
4. Press and hold the
key.
5. The display will change to show all dashes and then the software revision.
6. Release the key.
7. The display will change to show
!
(Calibration Counter) on the small upper seven-
segment display and up to a 3-digit number on the large lower seven-segment display
for approximately two seconds.
8. Next, the display will then show
+
(Configuration Counter) on the small upper seven-
segment display and up to a 3-digit numbers on the large lower seven-segment display
for approximately two seconds and then change to show all dashes.
NOTE:
If your scale is the Model apex-RI-C, additional information for the Wi-Fi
and Bluetooth (BLE) settings will be shown after the Configuration Counter. Refer
to the next section, Display Scale Wi-Fi and Bluetooth Settings for additional
information and instructions.
9. To return to the normal operation, press the
key or press the
key to turn off scale.
