3300-0329-0M Rev C
y
apex Portable Scale Owner’s
11
ANNUNCIATORS
The annunciators are displayed on the Weight screen to show that the scale is in the mode
corresponding to the annunciator label or that the status indicated by the label is active.
Figure No. 12
The low battery annunciator is located in the upper left corner of the display. It is used to
indicate the battery status. Refer to Battery section of this manual for more details.
CAL
(Calibration)
This annunciator is turned on when scale is in the Setup and Calibration mode.
[
[\
(STABLE)
This annunciator is turned on when the weight display is stable. When off, it means that the
change in successive weight samples are greater than the motion limits selected during
setup.
Æ
0
Å
(ZERO)
This annunciator is turned on to indicate that the weight displayed is /- 1/4 division of
the center of zero.
LOCK
This annunciator is turned on to show that the indicator is locked onto the displayed
weight. In operation, after obtaining a stable weight, pressing the
key will cause the
scale display to lock onto the weight and turn on the annunciator. Pressing the key again
will unlock the display and turn off the annunciator.
BMI
(Body Mass Index)
This annunciator is turned on when displaying the calculated body fat.
kg
This annunciator is turned on to indicate that the displayed weight is in kilograms.
lb
This annunciator is turned on to indicate that the displayed weight is in pounds.
cm
This annunciator is turned on when the displayed height measurement is in centimeters.
