3300-0329-0M Rev C
y
apex Portable Scale Owner’s
24
WI-FI SETUP, CONT.
Configure Wi-Fi Network Module, Cont.
Enter the Network Name (SSID), Password, and Device Name (optional) for the network you
wish to connect to. Note that the Device Name can be anything. Click on the
Connect
button
and the module should try to connect to that network. This may take several seconds. The
module will store these network credentials and connect to this network each time the scale is
turned on.
Changing the Network Credentials
To change the network credentials, perform the following steps:
1.
Press the
key to turn the scale on.
2.
Press and hold the
Ö
0
Õ
keys until the display shows the prompt
$
.
3.
Press the
key until the prompt
=`!
is showing.
4.
Next, press the
×
or
Ø
key until
=*
is displayed, and then press the
key. The
credentials will be
cleared
and the display will change to show
$
.
5.
Press the
key to turn the scale off and then press it again to turn the scale back on.
6.
Repeat the steps in the previous paragraph to set the new network credentials.
a
a
p
p
e
e
x
x
s
s
c
c
a
a
l
l
e
e
