Detection Systems
Abacus User Guide
Chapter 4.4
Page 1.11
Holder Code
Engineer Code
Keyswitch Control
Exit Terminator
Page 1.12
Installation Records List
Chapter 2 - Using the System
Page 2.1
General
Mode 1 Operation
Setting the System
Page 2.2
Part Setting the System
Page 2.3
Unsetting the System
Bad Set
Mode 2 Operation
Page 2.4
Setting the System
Page 2.5
Part Setting the System
Page 2.7
Unsetting the System
Page 2.8
Omitting Zones
Page 2.9
Reactivating Omitted Zones
Alternative Method of Reactivating Omitted Zones
Page 2.10
Attention Display
Quick Set/Help Keys
Keyswitch Operation
Page 2.11
Abort the Setting Routine
Reset the System
User Reset
Engineer Reset
Remote Reset
Page 2.12
Code Reset
Page 2.13
Setting Options Flow Chart
Unsetting Options Flow Chart
Chapter 3 – Programming
Page 3.1
General
Key Stroke Character Chart
Key Stroke Character Chart (Software Version 7000)
Page 3.2
Code Programming
Page 3.3
Delete a User Code
Page 3.4
Program Chime
Page 3.5
Programming the Date and Time
Page 3.6
Lock and Unlock Engineer Programming or Access via Modem
Page 3.7
Programming Flow Chart.
Chapter 4 – System Testing and Fault Indication
Page 4.1
General
Internal Sounder Checks
Zone Tests
Page 4.2
Zone Active Test
Bell Test and Sounder Tests
Page 4.3
Alarm Fault Display
Reading the Log
Page 4.4
Log information explained
Page 4.8
Quick Entry to the Log
Service Required
Page 4.9
Testing and Reading the Log Flow Chart
