Detection Systems
Abacus User Guide
Chapter 4.34
Quick Entry to the Log
On version 5000 software or later, when the display reads ALARM, press the
YES/PART key (Once to display cause of alarm for 2 seconds [software 7000
5 seconds]) Twice for fast entry to the Log.
The display now reads the last event in the log press the YES/PART key to
step back through the log in the same way as reading log above.
Service Required
The alarm system may inform you that a service is required when you unset the system. Inform your
installation or service engineer as soon as possible.
From the day mode, on setting the system you are also reminded that a service
is required. If you ignore this request for 14 days, (
Version 5000 software or
later 28 days)
the panel will lock out and you will not be able to set the
system. Your premises will not be protected
.
The display will, on attempting
to set the system display the following and then return to day mode.
The service engineer can give you an anti code, on quoting the number given,
to unlock your system for 14 days. To unlock the system, from the day mode
key in the anti- code given (i.e. key in 7, 9, NO, 5), should the engineer be
unable to attend within 14 day a new anti-code will be required, this again
can be provided by your service engineer.
0712 03:46P
Service
Required
Phone Engineer
0181 893 5642
Service Required
Quote
#
3456
0712 03:46P
ALARM!
0712 11 55 Off
K7 Gary
