Detection Systems
Abacus User Guide
Chapter 4.21
At this display, press the
NO
key. (XXXXXX = Code holders name if
programmed).
On Version 7000 software, this d isplay appears to allow you to return to the
day mode if you have made a mistake, press
YES/PART
key to continue.
At this display, press the
NO
key.
At this display, press the
1
key to enter the programming mode.
At this display, press the
1
key to enter the code-programming mode.
On Version 7000 software enter the code number you wish to change (see
system feature chapter 1)
At this display, press the
YES/PART
key to go the next code, repeat until
code to be deleted is displayed, press the
NO
key to edit, the = sign changes
to >. press the
NO
key again and check the word ‘Used’ disappears.
Press the
YES/PART
key (do not put any number in) Display will step to
next code. Repeat to delete further codes as required. (
Abacus 8/80 to ind ex
in 10s i.e. key in 3 to jump to code 30).
On completion press
0/ESC
once.
(Twice for mode 2 operation, Version 5000 software).
Press the
4
key to return to the day mode and check that the code has been
deleted, or press the number displayed, for function required.
Program Chime
From the day mode, enter the Main or Master code.
At this display, press the
NO
key. . (XXXXXX = Code holders name if
programmed).
On Version 7000 software, this display appears to allow you to return to the
day mode if you have made a mistake, press
YES/PART
key to continue
.
At this display, press the
NO
key.
At this display, press the
1
key to enter the programming mode.
Hello XXXXXX
Set System?
Omit Zones ?
1=Prog 2=Test
3=Log4=Day(Quit)
1=Code 2=Chim
e
3=Time
4=Engnr
Code 1 =Used
Master Bill
Code 3 >
Main
Anne
1=Prog 2=Test
3=Log4=Day(Quit)
0712 03:46P
System Off
Hello XXXXXX
Set System?
Omit Zones ?
1=Prog 2=Test
3=Log
4=Day(Quit)
YES: to Continue
No: to Quit
YES: to Continue
No: to Quit
Enter Code No. - -
