EN
Installation
10/2020
9 / 20
Installation
Installation Instructions
How to clamp the tool
Whether the tool is handled by an operator with a torque arm or embedded in a robot with high dynamics, it is
advised to select two clamping locations instead of one.
Before selecting where to clamp the tool, take into account the following instructions.
From EID20-1200 4Q to EID75-800
From EID120-660 to EID270-410
Dedicated clamping area for torque reaction.
Preferred clamping area.
This clamping area can be used as a secondary clamping. Do not use this area for torque reaction.
Prohibited clamping area.
Clamping on the motor shall always be selected as the very last option and the operation shall be done with extra
care.
Installing the tool on the mounting plate
WARNING Risk Of Electric Shock
Only qualified and trained operators should install, adjust or use this equipment.
