EN
Product Information
10/2020
5 / 20
Overview
General overview
EID are electric in-line nutrunners powered by one of the following Desoutter controllers.
- CVI3 Essential
- CVI3 Function
- CVI3 Vision
- TWINCVI3
They are hand-held by the operator.
They also can be used as fixtured tools and installed on a frame in the workstation by using the optional mounting
plates.
They received the tightening process to run from the controller.
Tools settings such as trigger management, LED management, run reverse mode, etc... can be set up with CVI CON-
FIG.
Change the orientation of the angle head by mounting an eFLEX cable.
Product description
1
Output drive
2
Trigger
3
Reverse button
4
Reporting LEDs
The following models are equipped with a front trigger on delivery.
- EID20-1200-4Q
- EID25-1200
- EID32-900
- EID44-1200
1
Handle trigger
2
Front trigger
This additional trigger is a safety device for the operator when the tool is equipped for example with a close-ended
head (Crowfoot) or an open-ended head (Tubenut). The operator has to press both triggers to start the tool.
The management of triggers can be set up with CVI CONFIG.
Technical data
Voltage
3 ~ 230 V
