31
2.3.3.4.1 Tuning – Differentials (Figure 35)
Pressing the
DOWN
key will now display the DIFFERENTIALS
screen (Figure 35). This screen shows the Cooling, Heating and
Humidity Switch Differentials. This differential is the range between
the making and breaking of the switch. The range of the Cooling
and Heating Differential is 0.0°F to 9.9°F. The range of the Humidity
Differential is 0.0% to 9.9%.
If the Pool Heating or Partial Pool options are enabled in the factory
configuration, the Pool and Partial Pool switch differentials are also
displayed. The range of the Pool and Partial Pool Differentials are
0.0°F to 9.9°F.
To modify the differentials, press the
ENTER
key and use the arrow
keys until the desired setting is shown. Press the
ENTER
key to
accept set point value. See the graphs in Figures 32 through 34 for
an illustration of the operation of the heating, cooling,
dehumidification and pool heating modes.
Press the
DOWN
key for the next Tuning screen. To return to the
Service Menu, press the
Esc
key.
Figure 35
2.3.3.4.2 Tuning – Air Heat (Figure 36)
Pressing the
DOWN
key will now display the AIR HEAT screen
(Figure 36). This screen shows the state of the air heat and the
associated set points and temperatures. The Zone set point is
settable from this screen. Press the
DOWN
key for the next Tuning
screen.
To return to the Service Menu, press the
Esc
key.
Desert Aire - CM3530 Manual
Summary of Contents for CM3530 Series
