![background image](http://html.mh-extra.com/html/desa/vf-30p-pjd/vf-30p-pjd_owners-operating-and-installation-manual_2485977005.webp)
www.fmiproducts.com
111826-04E
5
PRODUCT IDENTIFICATION
Figure 1 - Product Identification
LOCAL CODES
State of Massachusetts:
The installa-
tion must be made by a licensed plumber
or gas fitter in the Commonwealth of
Massachusetts.
Sellers of unvented propane or natural
gas-fired supplemental room heaters shall
provide to each purchaser a copy of 527
CMR 30 upon sale of the unit.
Vent-free gas products are prohibited for
bedroom and bathroom installation in the
Commonwealth of Massachusetts.
UNPACkING
Install and use heater with care. Follow all
local codes. In the absence of local codes,
use the latest edition of
The National Fuel
Gas Code ANSI Z223.1/NFPA 54
*.
*Available from:
American National Standards Institute, Inc.
1430 Broadway
New York, NY 10018
National Fire Protection Association, Inc.
Batterymarch Park
Quincy, MA 02269
Hand-Held
Remote Control
Chassis
Assembly
Control
Valve
Log Set
Assembly
CAUTION: Do not remove the
data plates from the grate as
-
sembly. The data plates contain
important warranty and safety
information.
1. Remove log set assembly from carton.
Note:
Do not pick up assembly by logs.
This could damage heater. Always handle
assembly by grate.
2. Remove control cover floor media compo
-
nents.
3. Remove all protective packaging applied
to log set for shipment.
4. Check heater for any shipping damage. If
heater is damaged call FMI PRODUCTS,
LLC at 1-866-328-4537 for replacement
parts before returning to dealer.